Originally posted February 26, 2015
The Mark 14 torpedo design was a step change in torpedo technology. The new Mark VI exploder was a magnetic exploder designed to detonate under a ship where there was little to no armor and where the damage would be greatest. The new exploder was tested using specially instrumented test torpedoes, but never a standard torpedo. Not particularly shocking given the lack of testing, the torpedoes routinely failed to function as designed once deployed.
The Mark 14 torpedoes tended to run too deep and often failed to detonate near the target. One of the issues was that the live torpedoes were heavier than the test torpedoes so they behaved differently.
There were also issues with the torpedo’s depth sensor. The pressure tap for the sensor was in the rear cone section where the measured pressure was substantially less than the hydrostatic pressure when the torpedo was traveling through the water. This meant that the depth sensor read too shallow and resulted in the torpedo running at deeper depths than its set point. Eventually the design of the torpedo was changed to move the depth sensor tap to the mid-body of the torpedo where the readings were more accurate.
The Mark 14 design also had issues with premature explosions. The magnetic exploder was intended to explode near a ship without actually contacting it. It used small changes in the magnetic field to identify the location of a target. The magnetic exploder had been designed and tested at higher latitudes and it wasn’t as accurate closer to the equator where the earth’s magnetic field is slightly different.
In desperation, many crews disabled the magnetic exploder on Mark 14 torpedoes even before official orders to do so came in July 1943. Use of the traditional contact exploder revealed yet another design flaw in the Mark 14 torpedoes. A significant number of torpedoes failed to explode even during a direct hit on a target. The conventional contact exploder that was initially used on the Mark 14 torpedo had been designed for earlier, slower torpedoes. The firing pin sometimes missed the exploder cap in the faster Mark 14 design.
The early technical issues of the Mark 14 torpedoes were eventually fixed and the torpedo went on to play a major role in World War II. Mark 14 torpedoes were used by the US Navy for nearly 40 years despite the early issues. But there is no doubt that it would have been far more effective and less painful to identify the technical issues during testing rather than in the field during war time. There are times when thorough testing may seem too expensive and time consuming, but having to fix a problem later is generally much more difficult. No one wants to waste effort on unnecessary tests, but a reasonable test program that verifies performance under realistic conditions is almost always worth the investment. And provides easy justification of the importance of testing.
Click here to view a high level Cause Map of the early issues of the Mark 14 torpedoes.
You can also learn more about the torpedoes by clicking here and here.
To learn how to create a Cause Map for one of your issues, attend an upcoming Public Workshop: